lab-aws-iot

AWS Alliance Workshop > AWS IoT Lab

AWS IoT Lab

This lab will walk you through connecting your Up2 Board to AWS IoT. In this lab you will configure a device in AWS IoT, send some test data, and finally send sensor data gathered at the edge up to AWS IoT.

Prerequisites

You will need to have completed the following steps:

Configure AWS IoT

The first step is to configure AWS IoT to recieve incomming data from your UP2 board.

Configure Pub/Sub Example

Now that you have configured AWS IoT lets configure the AWS Pub/Sub example in Arduino Create and start sending and reciveing data.